Halogen-Free Masterbatch PP200

PP 200 is a halogen free (HF) N/F system masterbatch.
Unlike normal commercial N/P systems , the lowest water absorption ,high efficiency flame retardant system is used . Over all , This is a high concentrated masterbatch and can be used in directly in molding , extrusion or compounding processes. There is no stocking problem anymore for N/P system additives.
The products made by this masterbatch are light , weather resistant , good electric/mechanical properties .

SUMMER SNOW




The products are widely used in PP tube/pipes , sheets , switch , cable , automotive parts , etc. The final products are well flame retarded , and in case of fire , it release lower smoke density , lower smoke toxicity , and lower heat release velocity , so protects human life and environment .


Properties :
Properties Unit Values
Appearance - White pellets
Size mm 2-3
Specific gravity G/cm3 1.40
Bulk density G/cm3 0.7
Moisture ppm Max 2500
Base resin - Polyolefin


Application:
Normally , it is used in PP halogen free compounds , or injection molding process .
The product are recyclable completely . and does not contain any halogen. ( Zero halogen)

Suggested Loading level:
According to applications：
25％on PP homopolymer， UL94 V0 （3.2／1.6mm）
30％on PP copolymer ， UL94 V0 （3.2／1.6mm）
25％on PP homopolymer（tubes）， DIN 4102 B1
18％ PE cable connectors ， DIN VDE 0613 Teil2－1
15％ PP homopolymer in automotive ， MVSS 302 （3.2mm）
25％ HDPE in automotive ， MVSS 302 （3.2mm）

Important Notes:
This masterbatch can be used in all PP , EPDM and TPE . Maximum processing temperature is 230’C .

Packing:

In 25kgs Kraft paper bags with the inner of PE bag, 1000kgs on wooden pallet with plastic film protection.

In 500/1000kgs net plastic super sack on wooden pallet with plastic-film protection.

Or according to buyer's requirements.